Pulsar

4 independent sub-modules combined in one product:

AURA: Triple signal processor that roughly alters the shape of the wave, flattening it both above and below.
Each processor has an independent audio input and output, but processor 1, by means of a switch, allows the signal to be sent directly to the Processor 2 as well as the signal from processor 2 can be sent to 3. There is also a feedback control that by means of a switch allows us to feed back processor 1 directly from the output of processor 2 or 3. Each processor is controlled by a potentiometer and two CV entries. These CV entries each have a different character.

DIMENSION: The idea of ​​this module is to oversize and beautify the signal, being able to create sounds that evoke polyphony.
The module consists of two parts, each with its own audio input and output, CV input, input signal control pot, and internal LFO control pot. In addition to a switch that allows you to internally send the signal from 2 to 1. The CV input is designed to introduce the signal from an external LFO, so doing so deactivates the internal one, passing the modulation to be governed by the external signal.

CREATOR: This module is an up and down signal multiplier.
It has two audio inputs, each one optimized for a type of signal (square and triangular / sawtooth) although we can put any type of signal in any of them. The inputs are simultaneous, then we can introduce two independent signals at the same time. The module has two control parameters: compensa and create. Each one governed by its potentiometer and its CV input. It also has a potentiometer that controls the output signal level.

P / S DLY: It is a double pseudo delay that by means of a switch can work in series or in parallel, thus allowing stereo effects.
It has one audio input and two outputs. If the module is operating in series, only one output will be active (Out S) and if we put it in parallel we will have the two independent signals in their respective outputs (Out S and Out P). Each part has 3 parameters that are controlled by potentiometers and are: Time, effect and feedback. In addition, each part has a CV entry.