The Phantom is a “live” triple lfo, with very interesting and original features which makes it a powerful tool for modulation. Unlike most CV lfo, which modulate the output frequency, the Phantom can control the amplitude of the wave and its shape through CV, mixing the signal from lfo A with B and vice versa.
Infinite waveforms of modulation: two lfo (A and B) with 16 waveforms each one that we can then mix frequency control in two ranges, from 0 to 20 Hz and from 0 to 0.2Hz
Level control for each one the waveform selection can be made with manually or via gate signal, all the information on the status of each of these two lfo is clearly visible on the display (frequency, level and waveform). The operation of each one can be fixed (locked) or synchronized with input pulses (trigg).
Third auxiliary lfo (C) with sinusoidal, triangular and square outputs, that controls the frequency in two margins. Shape of each wave can be adjusted, being able to convert triangular into sawtooth or ramp, as well as controlling the duty cycle of the square wave with
The sync switch for lfo B will act as a slave to lfo A, following this in synchronized frequency.
The Phantom allows the possibility of mixing the output of lfo A with the B output, obtaining the algebraic sum of both signals. An infinity of waveforms is achieved.
Control pots manually or CV or by means the third auxiliary lfo
The output signal of the lfo A will end up becoming the output signal of the lfo B and vice versa, thus being able, for example, to convert a triangular into a pulse or sinusoidal into a square as slow as you want. This transformation will be repeated in the margins that we choose, maintaining a “live” waveform at the two outputs.