The DDL-Analog Synthesizer is a modular analog synthesizer included in a single chassis. The modules are independent devices from each other, so they can be used with other external synthesizers and processing devices.
The synthesizer has been totally designed by Synamodec and its construction is totally handmade.
This model contains a voltage controlled oscillator (VCO), a low frequency oscillator (LFO), a white noise generator and a voltage controlled filter (VCF)
Square, sine and triangle signal output in three frequency ranges, low, medium and high all within the audible range.
Voltage control input to modulate the signal.
Outputs with an amplitude of +/- 5V, with three output ranges, 7000 HZ, 2100 Hz and 400 Hz.
The maximum signal applicable to voltage control is +/- 5V
With the modulation pot the CV level applied to the filter can be controlled. This filter can be added to the one selected by the VCO frequency control.
Square, sinusoidal, triangular and sawtooth signal output. Output frequency in two margins, low and very low, achieving cycles of several seconds duration.
Two inputs, one with level control for the VCO and another direct one for white noise (this does not have a level control since the white noise generator already has one).
Manual control of cut-off and resonance as well as voltage control inputs for each of them. Input level +/- 5V
The outputs are simultaneous, being able to use all three at the same time, there are three outputs high pass, low pass and band pass
Typical white noise signal output with output level control
Video demo here:
DND-SS1 Video Demo